About Bill Jordan
J.W Jordan BE, FIEAust, CPEng
- QUALIFICATIONS
- PROFESSIONAL AFFILIATIONS AND MEMBERSHIPS
- AWARDS
- SUMMARY OF EXPERIENCE
- PROFESSIONAL EXPERIENCE
- PAPERS
- WORKSHOPS AND OTHER PRESENTATIONS
QUALIFICATIONS
- Bachelor of Engineering (University of Sydney) (1969)
- Chartered Professional Engineer, Australia
PROFESSIONAL AFFILIATIONS AND MEMBERSHIPS
- Fellow, Institution of Engineers Australia; Member, College of Civil Engineers and College of Structural Engineers and registered in National Engineers Register (NER) in the general areas of practice of Civil, Structural and the specific area of practice of Heritage and Conservation Engineering
- Registered Professional Engineer Queensland
- Member, Association of Consulting Structural Engineers, NSW.
- Member, College of Investigative and Remedial Consulting Engineers, Australia (Board member 2016 to present)
- President, Newcastle Division of Institution of Engineers Australia, 2004
- Member, Engineering Heritage Australia board (formerly National Committee on Engineering Heritage) of the Institution of Engineers, Australia, 1991 to 2013 (Chairman, 1997/98)
- Member, Association for Preservation Technology
- Member, Building Limes Forum (UK)
- Member, Australian Earthquake Engineering Society
- Member, The Newcomen Society (UK)
AWARDS
- 1992 John Monash Medal of Institution of Engineers, Australia
- Engineering Heritage Australia Award of Merit 2010
SUMMARY OF EXPERIENCE
Mr Jordan commenced his professional career with the (then) NSW Department of Main Roads in 1969. In 1981 he joined Hughes Trueman Ludlow Engineers and opened its Hunter Valley office. He became a Director of that firm in 1986. He has been involved in design and construction of a wide variety of civil and structural projects including roads, bridges, railways, industrial developments, sewerage and drainage and mining infrastructure. He also has a particular interest in engineering heritage and has advised on the conservation and preservation of many buildings and artefacts, particularly following the 1989 Newcastle earthquake.
Curriculum Vitae
PROFESSIONAL EXPERIENCE
1993: Bill Jordan and Associates
Retired from Hughes Trueman Ludlow in November 1993 to establish his own company. Has worked across a range of civil, structural and heritage engineering projects. Part-time lecturer in Construction Safety (1994 to 1996) and tutor in structural design for Department of Civil Engineering (1995), University of Newcastle.
Instrumental in introducing "Cintec" masonry anchoring system to Australia. Principal structural consultant to Cintec and responsible for masonry anchoring and reinforcing required for earthquake repairs and strengthening of Christ Church Cathedral, Newcastle.
Projects have included a key involvement in the repair and strengthening of the Cathedral in Newcastle, assessment and repair documentation for heritage structures ranging from timber bridges and roof trusses to brick bakery ovens and the design and documentation of repairs to the Great North Road leading north of Wisemans Ferry. The NSW National Parks and Wildlife Service again engaged Mr Jordan for a number of projects on the "Devines Hill" section of the Great North Road during 2001. Further work on the Great North Road for Convict Trail Project Inc. and Councils in 2004–09 has included documentation for reconstruction of a Clares Bridge abutment, a structures survey along the full length of the road, design and documentation of pavement rehabilitation works and heritage studies and conservation management plans for specific sections of the road.
Important heritage structures assessed for damage and repair have included "Cintra" at Maitland, Stroud Anglican Hall and Rectory, Morpeth Bakehouse, old chimneys at Canberra Brickworks and Mt Morgan Mine (Queensland), Newcastle Railway Station, Tomago House, St Thomas’ Church, Port Macquarie and many other 19th century structures, including many churches.
In 2000 the Historic Houses Trust of NSW engaged Mr Jordan for continuing work at Elizabeth Farm, Australia’s oldest European building (from 1793). Work includes the implementation of pioneering techniques to monitor and control damage from reactive clay foundation movements.
Of particular note has been the conservation and strengthening of the 1836 convict-built "Red Bridge" in Campbell Town, Tasmania. In association with specialist consultants in England and Germany, the brick and stone masonry was conserved and the bridge strengthened to carry revised maximum highway loading.
Continuing investigation of old masonry structures has led to research into the design of lime mortars for masonry conservation and resulted in Mr Jordan being invited as principal speaker for the Heritage SA "Lime and Building Conservation" seminar in May 2002 and again for their "Cracking in Older Masonry" seminar, May 2004.
Masonry expertise has been developed to include work on many arch bridges and railway tunnels.
Vibration assessment of historical buildings due to mine blasting has led to the development of extensive monitoring capacity coupled with software tools for analysing vibrations and setting safe limits for higher ground vibration levels.
1981: Hughes Trueman Ludlow, Consulting Engineers
Joined Hughes Trueman Ludlow Engineers to open their Hunter Valley office and became a Director of that firm in 1986. He has been involved in design and construction of a wide variety of civil and structural projects including roads, bridges, railways, industrial developments, sewerage and drainage and mining infrastructure. He also has a particular interest in engineering heritage and has advised on the conservation and preservation of many buildings and artefacts, particularly following the Newcastle earthquake of 1989.
PAPERS
-
"The Newcastle Earthquake and Heritage Structures" (with E.G. Trueman and J.N. Ludlow), Transactions of Multi-Disciplinary Engineering, The Institution of Engineers, Australia, Vol. GE16 No.1 1992, pp. 53 - 62. (This paper was awarded the Institution of Engineers 1992 John Monash Medal.)
-
"Stabilising Heritage Buildings Founded on Reactive Clays - Dealing with Conflicting Requirements" (with B.J. Collins), Transactions of Multi-Disciplinary Engineering, The Institution of Engineers, Australia, Vol. GE17 No.2 1993, pp. 105-112. (An updated and modified version of this paper was presented at the "Material Evidence" seminar held by the NSW Heritage Office, April 2000 and in 2004 to Heritage South Australia seminar.)
-
"Claremont: A Case Study of Engineering in Building Conservation", Transactions of Multi-Disciplinary Engineering, The Institution of Engineers, Australia, Vol. GE18 No.2 1994, pp. 13-19.
-
"Earthquake Damage Repair and Strengthening of Christ Church Cathedral, Newcastle NSW" (with B.J. Collins), The Seventh International Conference on Structural Faults and Repair, Edinburgh, Scotland, July 1997 (Proceedings vol. 3, pp. 351 - 364), reprinted in "Strengthening and Stabilisation of Concrete and Masonry Structures" , International Concrete Repair Institute, 2003.
-
"Conservation of Red Bridge, Tasmania" (with R. McGee, G. Nichols and P. Selby-Smith), Austroads 4th Bridge Engineering Conference, Adelaide, November 2000 (Proceedings vol. 3, pp. 265 - 279).
-
"Factors in the selection of mortar for conservation of historic masonry", 6th Australian Masonry Conference, Adelaide, July 2001 (Proceedings pp. 231 – 240).
-
"Lime mortar and the conservation of historic structures", 12th Australian Engineering Heritage Conference, Toowoomba, 29 September – 1 October 2003; reprinted in Australian Journal of Multi-Disciplinary Engineering, The Institution of Engineers, Australia, Vol. 3 No.1 2004, pp. 35-41.
-
"The Conservation of Masonry Chimney Stacks" (with P. Spratt), 12th Australian Engineering Heritage Conference, Toowoomba, 29 September – 1 October 2003 ; reprinted in Australian Journal of Multi-Disciplinary Engineering, The Institution of Engineers, Australia, Vol. 3 No.1 2004, pp. 27-33.
-
"Retrofitting existing masonry buildings to resist explosions" (with S.P. Ward), Australian Journal of Multi-Disciplinary Engineering, Special Edition "Engineering a Secure Australia", Institution of Engineers Australia, 2004, pp. 81 – 87.
-
"The conservation and strengthening of masonry structures" (with C.L. Brookes), 7th Australian Masonry Conference, Newcastle, July 2004 (Proceedings pp. 83 – 92).
-
"Stabilising An 18th Century Building On Reactive Clay Foundations" (with M. Allman), Australasian Structural Engineering Conference, Newcastle, September 2005; reprinted in Australian Journal of Structural Engineering, The Institution of Engineers, Australia, Vol.6 No.3 2006, pp. 199 –206.
-
"Maintenance and operation of the 1885, rope-driven Craven Bros gantry crane" (with P. Cockbain), 2nd International & 13th National Engineering Heritage Conference, Sydney, September 2005; reprinted in Australian Journal of Multi-Disciplinary Engineering, The Institution of Engineers, Australia, Vol. 4 No.1 2006, pp. 69 – 75.
-
"Anchoring Blast Resistant Windows" (with S.P. Ward), Australian Earthquake Engineering Society Annual Conference, Albury, November 2005.
-
"Promoting Heritage Conservation Practice for Professional Engineers", 14th Australian Engineering Heritage Conference, Perth, 19– 21 November 2007 (invited keynote paper), republished in the Australian Journal of Multidisciplinary Engineering, Vol. 6, No. 1.
-
"Blast Vibration Effects on Historical Buildings" (with D. Sutcliffe and J. Mullard), Australasian Structural Engineering Conference, Melbourne, June 2008 (revised and published in the Australian Journal of Structural Engineering, Vol. 10 No. 1, 2009)..
-
"Earthquakes and historical buildings — it isn’t all bad news", (invited keynote paper) presented at Australian Earthquake Engineering Society Annual Conference, Ballarat, November 2008.
-
"Monitoring blast effects on historical buildings", presented at Australasian Structural Engineering Conference (in association with CECAR5), Sydney, August 2010.
-
"The Design and Use of Repair Mortars for Historical Masonry in Australia", presented at 2nd Historic Mortars Conference, Prague, September 2010.
-
"The engineering of Budj Bim and the evolution of a societal structure in Aboriginal Australia", 16th Engineering Heritage Australia Conference, Hobart, November 2011.
- “Mine blasting vibration and its effects on buildings and structures – implementing a frequency-based approach”, presented at Australian Earthquake Engineering Society Annual Conference, Barossa Valley, November 2011.
- “Induced building vibrations — can we calculate responses?”, presented at Australian Earthquake Engineering Society Conference, Hobart, November 2013.
- “Is Big Necessarily Better? The “Discovery” of Highly Significant Small Bridges” (with R. Melville), 17th Engineering Heritage Australia Conference, Canberra, November 2013.
-
“Maintenance and operation of the 1885 rope-driven Craven Bros gantry crane”, ‘Big Stuff 2015’, Lewarde, France, September 2015.
- "Mediaeval Vaults Show the Way to Conserving a 19th Century Reservoir Roof’", (with J. Mullard and C. Allen), 18th Engineering Heritage Australia Conference, Newcastle, December 2015.
- "Controlling and predicting effects on masonry buildings of ground vibrations from blasting", (with A. Richards and D. Stubbings), Australian Earthquake Engineering Society Annual Conference, Melbourne, November 2016
- "William Clark, The Forgotten Hero of Colonial Hydraulic Engineering", (with D. Campbell)), 19th Engineering Heritage Australia Conference, Mildura, October 2017
- "Reducing Risks to Historical Buildings from Ground Vibrations", 19th Engineering Heritage Australia Conference, Mildura, October 2017
- "Mine Blast Vibration Response Spectrum for Structural Vulnerability Assessment: Case Study of Heritage Masonry Buildings" (with H.H. Tsang,E.F. Gad, J.L. Wilson, A.J. Moore, & A.B. Richards), International Journal of Architectural Heritage , 2018, Vol. 12, No. 2, pp. 270-279
- "Modelling and monitoring 19th century masonry buildings subject to blast-induced ground vibration”, paper accepted for COVID-delayed 12th International Conference on Structural Analysis of Historical Constructions, Barcelona, Spain, September 2020. (Following cancellation of the conference, this paper was re-written and presented at the Australasian Engineering Heritage Conference (AEHC 2022), Sydney, October 2022)"
- "Particle velocity, frequency and pulse length: the third parameter governing reaction to ground vibration (with A. J. Moore & A. B. Richards), Australian Earthquake Engineering Society Conference, Adelaide (virtual), November 2021."
WORKSHOPS AND OTHER PRESENTATIONS
-
Various workshops and seminars on mortar, reactive clay foundations, damage to heritage buildings etc. for:
- NSW Heritage Council
- Heritage SA
- Institution of Engineers Newcastle, Sydney, Brisbane, Adelaide, Hobart etc.
- APTI Australia Chapter (Tasmania, May 2010)
- Friends of Manchester Museum of Science & Industry/Newcomen Society Chapter, September 2010
- APTI Denver, USA October 2010
- Seminars for College of Investigative and Remedial Consulting Engineers of Australia